Fiberglass inground pools
Years ago the only options for a durable in-ground swimming pool were made out of concrete or vinyl, but nowadays there are fiberglass swimming pools available that have proven to be far superior to concrete or vinyl pools. If you compare the sleek surface of a pool made out of fiberglass with the hard, scratchy surface of concrete, the difference is like comparing glass and sandpaper. Walking on the floor of a concrete pool, or rubbing along against the sides, can leave scrapes and cuts, and sometimes a bathing suit will snag on a rough edge and rip. The chemical makeup of concrete promotes the growth of micro-organisms, and the divots and grooves in concrete are places where bacteria and algae collect, leading to major cleaning and maintenance costs. The maintenance costs are very high with concrete pools, as one must clean, scrub and give them acid washes to protect the pool from the growth of bacteria. Fiberglass is multiple times stronger than concrete, and it doesn’t crack like concrete does, so there are no resurfacing and patching costs with fiberglass. While it is true that fiberglass pools cost somewhat more to buy and install compared to concrete, the lower maintenance expense make fiberglass pools way more cost-efficient over time. The edge fiberglass swimming pools have over concrete pools are many, including a more cost-efficient maintenance, quicker installation, a more pleasant swimming experience, and because fiberglass pools don’t use nasty chemicals, they are better for the environment.
Keep your pool warm with a solar pool heater
The solar revolution has finally struck the home swimming pool in the shape of solar pool heaters, the best, most cost-effective method to sustain a heated pool long after summer is over. Using the natural energy of the sun, a solar pool heater pumps water out of the pool into a filter and then up to the solar panels on the roof where the water is heated and then sent back into the swimming pool. The bigger the solar collector the longer into the colder months you can enjoy your pool, so the collector should be anywhere from 50% to 100% the size of the surface of the pool. Before you install anything you must make the critical decision on where to put the solar panels to get the most exposure to the sun as possible, and then it is also important to set the pump timer to switch on on during the day for maximum efficiency. Pool covers are a top notch investment to prevent the pool from losing significant amounts of heat, and stop the debris and wind blown dirt from entering your pool. Solar pool heater systems regularly cost in the $3-4K range, similar to propane heaters or heat pumps, but those systems have on-going operating expenditures that solar systems do not have. Since the only moving part in a solar pool heating system is the diverter valve, which controls the flow of water to the solar collector, solar systems have very low maintenance expenditures, unlike conventional pool heating systems. Because solar pool heaters employ natural sunshine for an energy source, you will not be emitting pollutants as you might with a propane heaters.
These are a few sites which could be informative when researching the topic of swimming pools and accessories. For example, if you have an interest in a swimming pool solar heater, then Easy Solar Pool Heaters will have a lot of helpful advice. This is where you can find more information regarding mesh swimming pool covers. Different articles relating to home upgrades and solar pool cover reels are available on Solar Pool Cover Reels.